Tap Reseater with Tapered Thread
The Haron TRS34 Tap Re-seater with Tapered Thread is a precision tool designed for maintaining and restoring taps. The TRS34 is designed to re-seat both interior and exterior 1/2" and 3/4" taps (12.7mm and 19mm)
For Reconditioning Tap Seats
1 Remove and dress fittings and handles.
2 Use the appropriate HARRON tap spanner to remove spindle.
3 Remover the washer.
4 Insert the Tap Re-seater into the body and screw the bush home into the body thread.
5 Holding the knob at the top of the tool, with light downward pressure, turn the knob clockwise so that the cutter removes a small amount of the seat. Be sure the cutter does this without chatter. Five or Six complete rotations is normally adequate.
6 Examine the seat to make sure that it is re-cut smoothly. A torch maybe useful to examine the seat.
7 Replace the tap assembly after fitting a new washer.
- Part no: TRS32.
- Suits 1/2" and 3/4" tap size.
- Resurface Tap Seats.
- Total Weight: 200g
-
-
Replacement 3/4” Cutting Wheel Part #: TRSC34.