Haron STR34 Tap Reseater with 1/2 and 3/4”
Click to enlarge

in stock

Haron STR34 Tap Reseater with 1/2 and 3/4”

sold in last hours
Vendor: HARON
Order in The Next to get it by
Real Time 6 Visitor Right Now
Spend $1 to get Free Shipping

Product Type: Tap Repair Tool

Barcode: 9312343064825

Tap Reseater with 1/2 and 3/4”

The Haron STR34 Tap Re-seater, is designed to re-seat both interior and exterior 1/2" and 3/4" taps (12.7mm & 19mm).

For Reconditioning Tap Seats

1 Remove and dress fittings and handles.

2 Use the appropriate HARRON tap spanner to remove spindle.

3 Remover the washer.

4 Insert the Tap Re-Seater into the body and screw the bush home into the body thread.

5 Holding the knob at the top of the tool, with light downward pressure, turn the knob clockwise so that the cutter removes a small amount of the seat. Be sure the cutter does this without chatter. Five or Six complete rotations is normally adequate.

6 Examine the seat to make sure that it is re-cut smoothly. A torch maybe useful to examine the seat.

7 Replace the tap assembly after fitting a new washer.

  • Part no: STR34.
  • Total Weight: 300g
  • Bonus: 2 x Tap Washers .
  • STR34 Re-seater  accommodates both 1/2"(12.7mm) and 3/4" (19mm) taps